• Microphone Behringer XM1800S Leaded
    General
    This is a definite must-have for anyone who has a mobile DJ show or who has to amplify his or her speech for any other reason. This three-microphone set is also very handy as a backup for your existing system. Thanks to the convenient transport case and included microphone clamps you can get started straight away!

    Specifications

    Product features
    On/Off Switch Yes
    Microphone sensitivity (dBV/PA) -52
    Microphone weight 200-249 grams
    Microphone impedance 600-649 ohms
    Maximum SPL not specified
    Maximum frequency 15 – 15.9 kHz
    Microphone accessories microphone clip, case
    Microphone set yes
    Minimum frequency 80 – 99 Hz
    Polar pattern super cardioid
    Type of audio connector XLR 3-pin
    Karaoke accessory type microphone
    Weight and dimensions including packaging
    Weight (incl. packaging)1.3 kg
    Dimensions (incl. packaging)31.0 x 21.0 x 7.0 cm

    specifications
    – set of 3 dynamic microphones
    – with on/off switch
    – low-noise
    – includes carrying bag
    – includes microphone stand adaptor
    – type: dynamic
    – frequency range: 80 to 15,000 Hz
    – pickup pattern: supercardioid
    – impedance: 600 ohms
    – 52 dBV (0dBV =1 V/Pa), 2.5 mV/Pa
    – connector: 3-pin balanced XLR (male)

    More info
  • Microphone Goose neck Shure 18″
    Wide dynamic range and frequency response Interchangeable cartridges Balanced, transformerless output Shock mount provides over 20 dB isolation from surface vibration noise Locking flange mount for permanently securing microphone to lecterns Snap-fit foam windscreen Product Features Available in 12 inch (30.5 cm) and 18 inch (45.7 cm) lengths Interchangeable cartridges provide the right polar pattern for every application Locking flange mount for permanently securing microphone to surfaces Snap-fit foam windscreen Shock mount provides over 20 dB isolation from surface vibration noise.
    Shure MX418S/N 18″ Switched G/Neck Exc Capsule – XLR Pre-Amp Base
    Transducer Type: Condenser
    Polar Pattern: Supercardioid, Omnidirectional, Cardioid
    Frequency Response: 50 Hz – 17 kHz

    More info
  • Microphone Lapel Sennheiser XSW 12 UHF
    When you’re in the middle of a presentation, the last thing you want is for your mic to suddenly cut out. That’s why Sennheiser gave their XSW 12 system a true-diversity receiver. This receiver is designed to provide you with up to 250′ of dropout-free operation. What’s more the XSW 12’s wireless transmitter provides you with an impressive 10-hour battery life, so you’ll never have to run out in the middle of a presentation to switch batteries.

    wireless lavalier system that provides you with amazing sound quality and reliable performance
    True Diversity reception provides you with worry-free operation
    24 MHz switching bandwidth with 960 available frequencies, tunable in 25kHz steps
    8 frequency banks containing 12 coordinated channels each
    Powerful scan function identifies available channels within a bank
    Component synchronization at a distance with Remote Channel sync for convenient onstage setup
    Up to 10 hours of operation with just 2 x AA batteries
    Up to 250′ of dropout-free transmission
    Illuminated audio mute button on transmitter make low-light operation easy
    Balanced XLR and unbalanced 1/4″ outputs for use with a wide range of equipment
    Operates in Sennheiser’s A band (548-572MHz)
    Sennheiser XSW 12 Wireless Lavalier System Includes:
    1 x SK 20 bodypack transmitter
    1 x EM 10 true diversity receiver
    1 x ME 2-2 omnidirectional clip-on mic
    1 x NT 2-3 power supply
    2 x rod antennas
    2 x AA batteries
    1 x Pouch
    1 x Instruction manual

    More info
  • Microphone KAM Quartet Wireless
    The Kam KWM Quartet is the latest in the KWM range from Kam. After the success of previous models, the new Kam mic system includes 4 wireless, handheld, rechargeable microphones and a receiver, all in one affordable and convenient package. The UHF mics feature on/off switches, a 120M range and a USB recharging function. The 19” receiver comes supplied with 2 rack ears for flight case integration and USB charging cable. The system also features 2 types of output: balanced XLR and unbalanced 1/4” jack. This is the perfect 4 channel mic system for anyone looking for an affordable and reliable microphone
    Professional 4 x USB rechargeable microphone UHF wireless system
    19 inch rackmount modular receiver design with LED status indicators
    2 x removable/adjustable antenna
    4 x colour coded microphone transmitters
    Balanced and unbalanced audio outputs
    USB charging for microphones (2 at a time)
    8 x rechargeable batteries included
    2 x rack ears & USB charging cable
    Specifications
    Dimensions:
    Height: 45 mm
    Weight: 420 mm
    Depth: 220 mm
    Frequency Band: Channel 70
    Frequencies: 20Hz-20KHz
    Oscillation Mode: Quartz Controlled Fixed Frequency
    Carrier Wave Stabilisation: 10ppm
    Sensitivity: -105dB @sinad = 12dB
    Signal to Noise Ratio: >100dB
    Total Harmonic Distortion:
    Spurious Rejection: 75 dB Typical
    Image Rejection: 85dB Typical
    Frequency Response: 40Hz-18KHz
    Squelch Control: Dual Squelch Circuit
    AF Output Impedance: 2.2K Ohms
    Maximum Output Level (Balanced): 0-400mV
    Maximum Output Level (Unbalanced): 0-200mV
    Power: DC 12-18V External Supply
    Balanced Audio Outputs: 4 x XLR Sockets
    Unbalanced Audio Output: 1 x 6.35mm Jack Socket
    USB Charge Output: 5V / 500mA
    Weight: 3.8Kg

    More info
  • Microphone Sennheiser XSW 35 UHF Wireless
    Sennheiser XSW35 Wireless Vocal Set Channel 38 (606 – 614 MHz) High Feedback Rejection Handheld Transmitter for Singers, Speakers and Presenters Mute, Sync and Tune Controls RF Frequency range: 606 – 614
    MHz Presets: 12 THD, total harmonic distortion: < 1
    Signal-to-noise ratio: > 103 dB(A)
    Transmission/receiving frequencies: 960 (520 in range E)
    Switching bandwidth: 24 MHz (13 MHz in range E)
    In compliance with: ETS 300422 , ETS 300445 , CE , FCC
    Features
    Handheld transmitter designed for use with Sennheiser XSW 1 and XSW 2 wireless systems
    Equipped with Sennheiser’s revered e825 dynamic microphone capsule
    Automatic frequency management in a stable UHF band
    Built to withstand even the most demanding performance environments
    Reliable signal transmission with intuitive operability
    Perfect for bands, theatres, conferences, lectures and more
    Warm and natural vocal reproduction with outstanding clarity
    Handy mute switch allows you to silence signal transmission with ease
    Linear frequency response from 100Hz up to 2.5kHz with a soft presence boost around 5kHz
    Excellent speech intelligibility with the ability to cut through the mix on your PA system

    More info
  • Microphone KAM Dual Wireless
    The KAM KWM11 is a dual channel, VHF wireless microphone system with a half-width 1U receiver and 2 handheld transmitter mics. This is a great affordable package for those looking to either set up a venue, or just to take to gigs and practice sessions.
    This excellent value dual VHF radio is a great sounding robust microphone system. Ideal for Schools, PA, Aerobics, Churchs etc.
    * Power LED
    * Receiver signal staus LED
    * 2 x Balanced XLR individual outputs Combined unbalanced 1/4” jack output
    * Individual channel A & B level controls
    * Range 50m
    * THD 0.5%
    * Mic power on/off switch
    * Mic mute/on switch
    * Mic signal status LED
    * Mic battery status LED
    * Frequency Response 40Hz – 15kHz
    * S/N Ratio >90dB
    * 50kHz bandwidth

    More info
  • Microphone KAM KWM6 Wireless
    Kam KWM wireless mic kits are ideal for the stage bound vocal performer who needs freedom to roam with a quality of sound you’ll find hard to beat for the price.

    The KWM6 system also offers simple setup and operation, making setup a breeze. All KAM wireless mic systems run on Channel 70 and are therefore not affected by the 2012 Digital Switchover.

    Features:
    Dual antenna with A-B switching
    Power LED
    Receiver signal staus LED
    Balanced XLR audio output
    Unbalanced 1/4 inch jack audio output
    Output level control
    Range: up to 50m
    Mic power on/off switch
    Mic mute/on switch
    Mic signal status LED
    Mic battery status LED
    Frequency response: 40Hz – 15kHz
    S/N ratio: >90dB
    THD: 0.05
    50kHz bandwidth
    RF frequency: 175.0

    More info



Back to top