• Amplifier 1300watt Impact
    Stereo output @ 4 Ohms: 650W x 2 RMS
    Stereo output @ 8 Ohms: 450W x 2 RMS
    Bridge output @ 8 Ohms: 1300W RMS
    Input connectors: Jack and XLR
    Output connectors: Speakon and binding post
    Protection: Short circuit and thermal
    Fan cooled
    Ground lift
    Limiter
    Indicators: Power, limit and protect
    Other features: Soft start
    Power supply: 240V
    Dimensions: 481 x 400 x 87mm
    Weight: 14Kgs
    The EP Series professional power amplifier is designed to achieve unsurpassed performance and long-term reliability, even when operating under extreme stress. Proven amplifier technology forms the backbone of rental systems and club installations nationwide. Auditoriums, churches, hire companies and mobile DJ’s are all ideal candidates for the DA Series amplifiers.

    More info
  • Amplifier 2500watt Warrior
    Zenith Series amplifiers are designed for durability and reliability without disregarding professional sound quality. The Zenith series exhibits very low levels of noise and distortion. Each Amplifier is designed for rugged use and intended to last because all components are of the highest quality. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality.

    Features:
    Input Connectors: Balanced XLR, 6.35mm Jack & 5 Pin Barrier Strip
    Output connectors: Neutrik Speakon & Binding post
    Indicators: Power, Signal and Clip
    Circuit Breaker Protection
    RATED OUTPUT POWER
    4 ohms – 900W x 2
    8 ohms – 540w x 2
    BRIDGE MODE MONO
    4 ohms – 2500W
    Specification:
    Power Supply: 240v
    Dimensions:483 x 90 x 380mm
    Weight: 23 kgs

    More info
  • Amplifier 800watt W Audio EPX
    2 x 270W @ 8ohm
    2 x 400W @ 4ohm
    Short circuit, overload and thermal protection
    Inputs: 2 x phono sockets, 2 x 1/4” jack sockets
    Outputs: 2 x locking speaker connectors, 2 x binding posts
    Power supply: AC240V/50Hz
    Dimensions: 87 x 481 x 297mm
    Weight 10.5kg
    PRODUCT DESCRIPTION
    This W-Audio EPX-800 19″ rack mountable power amplifier represents excellent value for money, not only in terms of power vs price, but has a great build quality too, making it ideal for home DJ, mobile DJ or live applications.
    When W Audio created the EPX800 they wanted this amplifier to be more than just a PA amp for large disco type speakers so they included all the necessary connections for it to be used in conjunction with our range ceiling speakers and compact wall speakers for creating a high powered background music system which can be turned up to create a light weight foreground system in the evenings.

    More info
  • Amplifier Q99 1800 watt (Electrovoice)

    • High-efficiency power and performance
    • Innovative Class-H design
    • 1250 W per channel (2 Ω)
    • Dynamic headroom for all real-world applications
    • XLR pass-though input connections
    • Easy connection to bi-amped loudspeakers
    • Switchable LPN filter for extra tonal fundamentals and “kick”
    • Protective low-cut for systems without subwoofers
    • Built-in dynamic limiters
    • Complete protection package
    • Three-stage front-to-rear fans
    Amplifier Gain 32 dB
    Continuous Rated Power (1 kHz, THD 1%) 2Ω 1250 Watts
    Continuous Rated Power (1 kHz, THD 1%) 4Ω 900 Watts
    Continuous Rated Power (1 kHz, THD 1%) 8Ω 550 Watts
    Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω 800 Watts
    Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω 400 Watts
    Cooling Front-to-Rear, 3-stage fans
    DIM 30 0.05 %
    Electronics Type Amplifier
    Frequency Response 10 Hz – 40 kHz ±1 dB
    Impedance 2/4/8 Ω
    Input Impedance (Balanced) 20 kΩ
    Input Sensitivity +5.1 dBu
    Intermodulation Distortion (SMPTE) 0.1 %
    Mains Voltage 100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured)
    Maximum Bridged Output 4Ω 2800 Watts
    Maximum Bridged Output 8Ω 1800 Watts
    Maximum Input Voltage +21 dBu 8.69 Vrms
    Network Control (IRIS-Net) No
    Signal-to-Noise Ratio (A-weighted) 109 dB
    Slew Rate 27 V/µs
    Topology Class-H
    Total Harmonic Distortion 0.03 %
    Height 2RU 88.1 mm (3.47)
    Width 483 mm (19.02)
    Depth 421.5 mm (16.59)
    Weight Net 16.3 kg (35.94 lbs)

    More info
  • Amplifier DA 800 watt (Warrior)
    The Warrior Audio DA500 2U Power Amplifier represents great value value for money with a high power output of 800 Watts a side into 4 Ohms with connections to allow inputs via either 1/4″ jacks or RCA phono sockets with outputs being on either speakon, binding post terminals or 1/4″ jacks. The amps are incredibly well built for the price and sound fantastic.
    Features:
    Stereo output @ 4 Ohms: 400W x 2
    Stereo output @ 8 Ohms: 270W x 2
    Input connectors: Jack and Phono
    Output connectors: Speakon, jack and binding post
    Protection: Short circuit and thermal
    Fan cooled
    Indicators: Volume, peak and protect
    Other features: Soft start
    Specifications:

    Power supply: 240V
    Dimensions: 483 x 395 x 88mm
    Weight: 14kg

    More info
  • Amplifier W Audio EPX 800 watt

    The W-Audio EPX 800 professional power amplifier offers superior reliability and performance, with a full range of power options available to suit a variety of applications.

    his W-Audio EPX-800 19″ rack mountable power amplifier represents excellent value for money, not only in terms of power vs price, but has a great build quality too, making it ideal for home DJ, mobile DJ.
    EPX800 Features:

    2 x 270W @ 8 Ohms
    2 x 400W @ 4 Ohms
    Short circuit, overload and thermal protection
    Inputs: 2 x phono sockets, 2 x 1/4″ jack sockets
    Outputs: 2 x locking speaker connectors, 2 x binding posts
    EPX800 Specifications:

    Power supply: AC240V/50Hz
    Dimensions: 87 x 481 x 297mm
    Weight 10.5kg

    More info
  • Amplifier 1000 watt W Audio EPX

    Amplifier 1000 watt W Audio EPX. Great amplifier which can run 2 full range speakers at 8 ohms or 2 bass speakers and 2 full range speakers at 4 ohms.
    Punchy amplifier. 2 U rack mounted and comes in a flight case.
    Stereo output @ 4 Ohms: 900W x 2 RMS.
    Stereo output @ 8 Ohms: 600W x 2 RMS .
    Bridge output @ 8 Ohms: 1800W RMS.
    Input connectors: Jack and XLR.
    Output connectors: Speakon and binding post.
    Protection: Short circuit and thermal.
    Fan cooled.
    Ground lift.
    Limiter.
    Indicators: Power, limit and protect.
    Other features: Soft start.

    More info
  • Amplifier Q66 1200 watts (Electrovoice)
    · Dynamic headroom for all real-world applications
    · 900 W per channel (2 Ω)
    · Class-AB design
    · XLR pass-though input connections
    · Easy connection to bi-amped loudspeakers
    · Switchable LPN filter for extra tonal fundamentals and “kick”
    · Protective low-cut for systems without subwoofers
    · Built-in dynamic limiters
    · Complete protection package
    · Three-stage front-to-rear fans

    Amplifier Gain 32 dB
    Continuous Rated Power (1 kHz, THD 1%) 2Ω 900 Watts
    Continuous Rated Power (1 kHz, THD 1%) 4Ω 600 Watts
    Continuous Rated Power (1 kHz, THD 1%) 8Ω 380 Watts
    Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω 500 Watts
    Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω 250 Watts
    Cooling Front-to-Rear, 3-stage fans
    DIM 30 0.05 %
    Electronics Type Amplifier
    Frequency Response 10 Hz – 40 kHz ±1 dB
    Impedance 2/4/8 Ω
    Input Impedance (Balanced) 20 kΩ
    Input Sensitivity +3.1 dBu
    Intermodulation Distortion (SMPTE) 0.1 %
    Maximum Bridged Output 4Ω 1800 Watts
    Maximum Bridged Output 8Ω 1200 Watts
    Maximum Input Voltage +21 dBu 8.69 Vrms
    Network Control (IRIS-Net) No
    Signal-to-Noise Ratio (A-weighted) 107 dB
    Slew Rate 26 V/µs
    Topology Class-AB
    Total Harmonic Distortion 0.03 %
    Height 2RU 88.1 mm (3.47)
    Width 483 mm (19.02)
    Depth 421.5 mm (16.59)
    Weight Net 14.8 kg (32.63 lbs)

    More info
  • Bass Speakers great for DJ and a Band PA. Giving that extra punch to any sound system. Pole mounts in the top to connect a speaker pole and mount the mid top speakers.
    Included in 1500 watt PA Speaker Package. 1500 watt amplifier. 2 x full range speakers and 2 x bass speakers.
    Speakers Bass KAM Z Sub 500 watts. Black covered in vinyl with steel mesh grill.
    500w RMS / 1000w peak.
    Awesome scoop cabinet sub.
    Mid/high output from crossover when linking with a full range cabinet.
    Built in crossover.
    High pass output.
    8 ohms Speaker.
    Weight: 40Kg.
    Dimensions: 520 x 560 x 625mm.
    Output connectors: 2 x speakon.

    More info
  • CD Player Citronic CDMX-1 CD Player / Mixer
    An impressive combination of a dual CD/MP3 player and 2 channel mixer, all housed in a solid metal case. The dual CD player can play MP3 discs and has anti-shock, seamless loop, unique jog and shuttle wheels with central LCD displays, it also has a program mode which allows the user to select up to 20 tracks. The 2 channel mixer has rotary controls for setting the high, mid, low frequencies and cue and channel gain, also 60mm channel sliders.

    Features –
    * 2 channel 6 input mixer, 2 x phono, 2 x line, 2 x mic (Jack/XLR) inputs
    * 19″ rack mountable (6U)
    * 60mm channel faders
    * 3 band EQ
    * Dual 6 LED monitor display
    * Master and record outputs via RCA phono sockets
    * Headphone output
    * Replaceable crossfader
    * 40 Seconds anti-shock memory
    * Elapsed/remain/total time displayed
    * Unique circular LCD screens with blue backlight, located in the centre of the jog/shuttle wheels
    * Seamless loop
    * Program mode (20 tracks max.)
    * Relay/single/continuous play modes
    * Pitch range ±16%
    * Pitch bend buttons
    * Fader start
    * Disc indicator LEDs

    More info
  • CD Player Gemini CDM500 CD Player / Mixer
    The CDM-500 Professional DJ Station features a dual tray-loading CD player with an integrated 2-channel mixer in one conveniently compact design. Whether mixing at home, in the club, or at a party, the CDM-500 delivers optimum functionality in a unit that is perfect for permanent installations or DJs on the go.
    Audio CD and CD-R compatible
    Anti-Shock using RAM Buffer Memory
    Instant-Start and Cue with preview
    Single/continuous play modes
    Fader-Start capability
    Seamless loop per side with reloop
    Pitch bend via Jog wheel or buttons
    Three time display modes
    Frame accurate search
    Direct track access buttons
    Pitch control with range of +/- 12%
    +10 track button for quick navigation
    Fully programmable with repeat function
    3-band EQ w/ Gain Control
    1/4″ headphone output
    XLR and 1/4″ mic input
    Auxiliary Inputs for Phono or Line devices

    More info
  • Controller Cortex HDC1000
    Want to mix and scratch like a professional DJ? To be a good DJ you need to understand the concepts of mixing tracks, adding cool effects, and of course you need a good sense of rhythm to line up the beats. This how to video explains how you use a CORTEX HDC-1000 DJ kit. This is a unit that will allow you to play and mix your music from your external hard drive, ipod or thumb drive. The beauty about the Cortex HDC-1000 is you could go to a gig with a few thumb drives in your pocket, plug and play. Watch this DJ tutorial and you can learn use the CORTEX HDC-1000 DJ kit.

    More info
  • Controller Denon MC6000 Media Player
    DJ Controller Buit-In Audio Interface:
    Features
    Computer Independent 4-Channel, 8 Source Premium Digital Mixer
    Slim Tabletop design for various DJ applications and portability
    Includes 19″ rackmount accessory kit for Mobile DJs
    Optimized for *Traktor and *Virtual DJ users
    Intuitive 4 deck software control, with visible deck color change
    Real-time Matrix Operation, Analog Sources, USB MIDI & USB Audio
    Included USB Audio Interface (Soundcard) 2in/2out (stereo)
    MAC OSX Windows XP/Vista/Win7 Compatible
    New, 3-way Powerful Audio/Video Assignable cross-fader
    Newly designed, high resolution 105mm Touch-Sensitive Jog Wheel
    Smooth 60mm long Pitch Slider with high 14-bit resolution
    Pitch/Fader/Volume Lock function – holds the last known Audio value and position until the NULL point is reached again
    File browse navigation keys & rotary encoder file selector knob w/illuminated ring
    8 (4 + 4) Hot Cue/Sampler buttons w/dual bank selector key
    Auto Loop Button w/ Beat Jump (Loop Cut)
    Manual Loop In/Out buttons
    Large size Cue & PLAY buttons
    Various EFX control, EFX keys & Parameter knobs
    Various GUI control, Mixer, Video, Scratch, Sampler, REC
    Powerful Shift Key – used for various dual button operation
    Search Keys (<< >>) to advance around within the file
    Denon’s legacy “Pitch Bend” keys
    Vinyl & Pitch Bend Jog modes
    SYNC key for beat matching between decks
    Key Lock on/off button with LED confirmation
    Matrix Input Assignment Selector Knob
    Selectable PFL input gain & program meters
    Independent CUE System (all channels)
    Split Cue function with Cue/Master pan knob
    High quality, high output Headphone Amp
    45mm Channel & Cross Faders
    Independent Channel A-B Thru Switch (crossfader)
    Cross Fader contour adjustment
    Independent 3-Band Channel EQ w/Kills (High-Mid-Low)
    XLR Balanced & RCA Unbalanced Master Output
    Master Output Stereo/Mono switch
    Booth Output w/Source Selector & level control
    XLR & 1/4 TRS Mic Inputs
    Mic 3-Band EQ (High-Mid-Low) for Mic 1 & 2
    Mic Ducking & Built in Echo Effect for Mic 1 & 2
    Various Utility presets to customize user settings
    MIDI Mappable control surface (Faders, knobs and buttons) for other DJ applications
    Firmware upgradable over USB
    Solid Steel chassis construction
    Kensington lock terminal to prevent theft
    ECO standby mode (green, energy saving)
    AC adaptor powered
    Traktor LE included for Europe and Asia Pacific
    Virtual DJ LE included for America’s & Canada
    Size 18.1″(w) x 2.0″(h) 10.0″(d) without rack ears
    19.0″(w) 6U (d) rack mounting size
    460(w) x 50(h) x 315(d) mm without rack ears
    482(w) x 50(h) x 315(d) mm without ears

    More info
  • Controller Denon DN-HD2500 Media Player
    The DN-D2500 is a hard-drive based, professional media player and controller offering a total all-in-one nerve center that addresses and actually anticipates ever changing needs. Flexible and packed with features,
    Internal 40GB Hard Drive, just power on and play!
    External USB Device Support (iPod, Thumb Drive, Hard Drive)
    BU4500 CD Drive Support for CD / MP3 Playback
    Midi Interface Controller (controls various DJ software; Serato Scratch LIVE, Traktor, Virtual DJ)
    USB Audio, Internal Sound Card for Dual Player Support
    4 Superb Built-in Audio Effects
    3 Platter Effects
    2 Hot Starts/Seamless Loops
    8-way File Searching System
    Create Playlists
    Hot List Feature
    Next Track Function
    Cross Fade Function
    Formats External Hard Drives to FAT32

    More info
  • Controller iDJ Pro iPad
    iDJ Pro from Numark is a professional DJ controller that expands your iPad’s  interface.

    • Integrates touchscreen and processing power of iPad into DJ control surface
    • Access and mix your iTunes library
    • Capacitive touch-activated platters, die-cast aluminum volume knobs
    • Brushed aluminum casing with hot cue, loop, and effects controls
    • 3-way effect capability: filter knob, effect knob, and X/Y pad in djay app
    • Streams wirelessly via iPad to Bluetooth® or AirPlay® speakers
    • Supports stereo output and cueing in iOS 6
    • RCA inputs, 1/4-inch (6.35mm) mic input, and XLR outputs
    • Core MIDI-compatible

    iPad docking station

    More info
  • Controller Numark Mixdeck Express
    Complete system with CD/MP3/USB decks, mixer, computer audio and MIDI interface MIDI integration of decks for controlling computer software Serato DJ Intro software included Pre-mapped for Traktor Pro 2 and Virtual DJ Pro Play from CDs, MP3 CDs, USB flash drives, computers, and external inputs Three-channel mixer with EQ/rotary kills, replaceable crossfader, and external inputs USB computer interface for software control and audio streaming Brake, Reverse, and Scratch effects Smooth, fast, slot-loading drives with large, touch-sensitive platters Control MIDI software, with no timecode needed, via USB Automatic BPM analyzer and Tap tempo for manual BPM entry ±6, 12, 25, 100% Pitch Ranges Seamless looping Single-track, continuous, and programmable playback Two large, backlit displays for BPM, CD/MP3 text tags, and folder navigation Anti-Shock™ buffered skip-protection technology Fader Start – crossfader play activation.

    Numark Mixdeck Express

    More info
  • Speakers EV Eliminator Full Range 350 watt
    The Eliminator i features a 15 in. 2-way high-output stage system with 350 watts continuous handling. RMD provides improved clarity and presence. Electro-Voice Emliminator i is a family of pro-grade sound reinforcement components – full-range loudspeakers, subs, and amp – engineered to play together as an integrated system. Eliminator i is ideal for bands and mobile DJs who want incredible sound without burning all their gig money on equipment, or endlessly tweaking a complicated setup. Just cable-up the matched Eliminator i components and play your music.
    Power Handling 350 W cont. / 700 W prog. / 1400 W peak
    Frequency Range (-10dB) 45 Hz–20 kHz Crossover Frequency 1600 Hz
    Sensitivity 1 W/1 m 99 dB Rec. High-Pass Freq. 40-50 Hz (18dB/oct.)
    Max SPL/ 1m (calc) 130 dB Nominal Impedance 8 Ω
    Coverage (HxV) 60° x 40° Minimum Impedance 5.3 Ω
    Enclosure Tuning 50 Hz Enclosure Finish black carpeted
    Input Connectors Parallel ¼” phone jacks Transducer Complement (HF/LF)

    More info
  • Speakers EV Force IE Bass 450 watt

    Speakers EV Force IE Bass 450 watt. Electro voice, one of the best sounds around. Our hire stock boast lots of models from SX to Eliminator range. With crisp and punchy sound for any event including DJs, Disco and Bands.

    The Force ie system from Electro-Voice is a total sound reinforcement system with the performance, features, and reliability that professionals demand, at very affordable prices. Force ie gives you concert-proven EV technology that’s used by touring bands around the world.

    15mm Plywood housing. 2 side handles. 29kgs. Top hat. Protective grill. Provided with covers.

    Full range 18” RMS 450 watt PEAK 1200 watts.
    2 x Speakon neutrik connectors.
    Top hats for pole mounts.
    Black matt finish.
    Suitcase style with wheels and extendable handle for ease of transporting.

    More info
  • Speakers EV SX 100 Full Range 200 watts
    Compact 12-inch two-way system with 200 watts continuous, 800 watts peak power handling plus a constant-directivity horn offers excellent projection capability and allows the system to be used horizontally or vertically with identical coverage Durable polypropylene enclosure is light and very strong.

    Compact 12-inch two-way system with 200 watts continuous, 800 watts peak power handling plus a constant-directivity horn offers excellent projection capability and allows the system to be used horizontally or vertically with identical coverage Durable polypropylene enclosure is light and very strong.
    Available in black and white, Built-in stand mount and inserts in enclosure accomodate a wide range of accessories to allow safe suspension, arraying and use as a floor monitor Ring-Mode Decoupling delivers smooth, accurate vocals, instruments and mids. Sound quality remains even over a wide dynamic range.
    Available with either parallel 1/4-inch connectors or Neutrik Speakons

    Frequency Response (-10dB) 60 – 20000 Hz
    Sensitivity 1W/1m 98 dB
    Max. SPL / 1m (calc); full space 127 dB
    Coverage (nominal -6dB) H° 65 °
    Coverage (nominal -6dB) V° 65 °
    System Power Handling (continuous/program/peak) 200/400/800 Watts
    Crossover Frequency 1500 Hz
    Nominal Impedance (Passive) 8 Ohms
    Minimum Impedance 5.6 Ohms
    Color Black
    Directivity Index 11.1 dB
    Flying Yes
    Input Connections Parallel Neutrik® NL4
    Outdoor No
    Chassis Size 12 inches
    Internal Crossover Yes
    Speaker Type Fullrange, Mid-High, Two-Way
    Weight Net 14.5 kg ( 31.97 lbs )
    Dimensions (HxWxD) 586 x 429 x 312mm (23.07 x 16.89 x

    More info
  • Amplifier 1600watt Gemini
    he GXA-1600 is a powerful amplifier that will ensure solid sound stability with a constant performance.This amplifier will operate at 8, 4 & 2 ohms with mono or bridge modes, enabling a user to utilize it in a variety of ways with different sound systems.The monitoring systems use various LEDs for proper indication of distortion & different operating modes. We have also included balanced inputs & outputs for improved connectivity, resulting in a very useful solution

    Gemini GXA 1600 Amplifier:
    Pro amplifier stable at 2 Ohms
    500 Watts RMS per channel at 4 Ohms
    300 Watts RMS per channel at 8 Ohms
    Advanced protection circuitry
    Speakon outputs
    XLR / Jack inputs

    More info
  • 1500w RMS power KAM amplifier
    Outstanding build quality and reliability
    Thermally efficient central heat sink design
    Vented front panel with forced fan cooling
    Thermal protection relay
    Peak signal protection
    Balanced XLR audio inputs
    Unbalanced 1/4 inch jack audio inputs
    Speakeron and binding post speaker outputs
    Bridge mode operation
    Earth lift switch
    Specifications:

    Minimum impedance: 4 Ohms
    750w RMS @ 4 Ohms per channel
    450w RMS @ 8 Ohms per channel
    S/N ratio: 90dB
    THD: 0.1%
    Dimensions: 416 x 88 x 481mm
    Weight: 18Kg
    Introducing the KAM KXR 1500 professional high power amplifier. Specifically built for the mobile DJ, the KXR 1500 not only boasts superb build quality and an immensely generous 750w RMS of power into 4 ohms, but also offers reliability and affordability all rolled into one. Similar to the rest of the KXR range, the KXR 1500 has a vented front panel with forced fan cooling for operating under pressure for a large amount of time, and also peak signal protection. Inputs are via balanced XLR, alongside speakon and binding post outputs. The Kam KXR 1500 is a truly remarkable workhorse, ready to power your mobile for an attractive price today.

    More info
  • Speakers KAM Soundforce V2 300 watt
    300w continuous RMS
    600w peak power
    Trolley wheels
    Sensitivity: 97dB -1w/1m
    Frequency response: 55Hz – 20KHz 3dB
    Audio inputs: AUX / Microphone / USB / iPhone / iPod / SD card
    Audio input connections: RCA phono / XLR
    Microphone connections – Jack / XLR
    Audio output connections: Jack / XLR
    Fuse rating (active): 20mm / 5.0 amp
    Rated voltage: AC 100V-240V / 50Hz-60Hz
    35mm pole mount
    Trolley wheels
    Dimensions (WxHxD): 450 x 675 x 405mm
    Weight: 25Kg
    Two way injection moulded active speaker with built-in USB/SD media player, 5 band EQ, microphone input and iPod dock
    Power handling:
    300w continuous RMS
    600w program power
    1200w peak power
    High quality woofer and tweeter with crossover
    15 inch driver
    Steel woofer chassis
    Tweeter: Ti.Compression

    More info
  • Microphone Behringer XM1800S Leaded
    General
    This is a definite must-have for anyone who has a mobile DJ show or who has to amplify his or her speech for any other reason. This three-microphone set is also very handy as a backup for your existing system. Thanks to the convenient transport case and included microphone clamps you can get started straight away!

    Specifications

    Product features
    On/Off Switch Yes
    Microphone sensitivity (dBV/PA) -52
    Microphone weight 200-249 grams
    Microphone impedance 600-649 ohms
    Maximum SPL not specified
    Maximum frequency 15 – 15.9 kHz
    Microphone accessories microphone clip, case
    Microphone set yes
    Minimum frequency 80 – 99 Hz
    Polar pattern super cardioid
    Type of audio connector XLR 3-pin
    Karaoke accessory type microphone
    Weight and dimensions including packaging
    Weight (incl. packaging)1.3 kg
    Dimensions (incl. packaging)31.0 x 21.0 x 7.0 cm

    specifications
    – set of 3 dynamic microphones
    – with on/off switch
    – low-noise
    – includes carrying bag
    – includes microphone stand adaptor
    – type: dynamic
    – frequency range: 80 to 15,000 Hz
    – pickup pattern: supercardioid
    – impedance: 600 ohms
    – 52 dBV (0dBV =1 V/Pa), 2.5 mV/Pa
    – connector: 3-pin balanced XLR (male)

    More info
  • Microphone Goose neck Shure 18″
    Wide dynamic range and frequency response Interchangeable cartridges Balanced, transformerless output Shock mount provides over 20 dB isolation from surface vibration noise Locking flange mount for permanently securing microphone to lecterns Snap-fit foam windscreen Product Features Available in 12 inch (30.5 cm) and 18 inch (45.7 cm) lengths Interchangeable cartridges provide the right polar pattern for every application Locking flange mount for permanently securing microphone to surfaces Snap-fit foam windscreen Shock mount provides over 20 dB isolation from surface vibration noise.
    Shure MX418S/N 18″ Switched G/Neck Exc Capsule – XLR Pre-Amp Base
    Transducer Type: Condenser
    Polar Pattern: Supercardioid, Omnidirectional, Cardioid
    Frequency Response: 50 Hz – 17 kHz

    More info
  • Microphone Lapel Sennheiser XSW 12 UHF
    When you’re in the middle of a presentation, the last thing you want is for your mic to suddenly cut out. That’s why Sennheiser gave their XSW 12 system a true-diversity receiver. This receiver is designed to provide you with up to 250′ of dropout-free operation. What’s more the XSW 12’s wireless transmitter provides you with an impressive 10-hour battery life, so you’ll never have to run out in the middle of a presentation to switch batteries.

    wireless lavalier system that provides you with amazing sound quality and reliable performance
    True Diversity reception provides you with worry-free operation
    24 MHz switching bandwidth with 960 available frequencies, tunable in 25kHz steps
    8 frequency banks containing 12 coordinated channels each
    Powerful scan function identifies available channels within a bank
    Component synchronization at a distance with Remote Channel sync for convenient onstage setup
    Up to 10 hours of operation with just 2 x AA batteries
    Up to 250′ of dropout-free transmission
    Illuminated audio mute button on transmitter make low-light operation easy
    Balanced XLR and unbalanced 1/4″ outputs for use with a wide range of equipment
    Operates in Sennheiser’s A band (548-572MHz)
    Sennheiser XSW 12 Wireless Lavalier System Includes:
    1 x SK 20 bodypack transmitter
    1 x EM 10 true diversity receiver
    1 x ME 2-2 omnidirectional clip-on mic
    1 x NT 2-3 power supply
    2 x rod antennas
    2 x AA batteries
    1 x Pouch
    1 x Instruction manual

    More info
  • Microphone KAM Quartet Wireless
    The Kam KWM Quartet is the latest in the KWM range from Kam. After the success of previous models, the new Kam mic system includes 4 wireless, handheld, rechargeable microphones and a receiver, all in one affordable and convenient package. The UHF mics feature on/off switches, a 120M range and a USB recharging function. The 19” receiver comes supplied with 2 rack ears for flight case integration and USB charging cable. The system also features 2 types of output: balanced XLR and unbalanced 1/4” jack. This is the perfect 4 channel mic system for anyone looking for an affordable and reliable microphone
    Professional 4 x USB rechargeable microphone UHF wireless system
    19 inch rackmount modular receiver design with LED status indicators
    2 x removable/adjustable antenna
    4 x colour coded microphone transmitters
    Balanced and unbalanced audio outputs
    USB charging for microphones (2 at a time)
    8 x rechargeable batteries included
    2 x rack ears & USB charging cable
    Specifications
    Dimensions:
    Height: 45 mm
    Weight: 420 mm
    Depth: 220 mm
    Frequency Band: Channel 70
    Frequencies: 20Hz-20KHz
    Oscillation Mode: Quartz Controlled Fixed Frequency
    Carrier Wave Stabilisation: 10ppm
    Sensitivity: -105dB @sinad = 12dB
    Signal to Noise Ratio: >100dB
    Total Harmonic Distortion:
    Spurious Rejection: 75 dB Typical
    Image Rejection: 85dB Typical
    Frequency Response: 40Hz-18KHz
    Squelch Control: Dual Squelch Circuit
    AF Output Impedance: 2.2K Ohms
    Maximum Output Level (Balanced): 0-400mV
    Maximum Output Level (Unbalanced): 0-200mV
    Power: DC 12-18V External Supply
    Balanced Audio Outputs: 4 x XLR Sockets
    Unbalanced Audio Output: 1 x 6.35mm Jack Socket
    USB Charge Output: 5V / 500mA
    Weight: 3.8Kg

    More info
  • Microphone Sennheiser XSW 35 UHF Wireless
    Sennheiser XSW35 Wireless Vocal Set Channel 38 (606 – 614 MHz) High Feedback Rejection Handheld Transmitter for Singers, Speakers and Presenters Mute, Sync and Tune Controls RF Frequency range: 606 – 614
    MHz Presets: 12 THD, total harmonic distortion: < 1
    Signal-to-noise ratio: > 103 dB(A)
    Transmission/receiving frequencies: 960 (520 in range E)
    Switching bandwidth: 24 MHz (13 MHz in range E)
    In compliance with: ETS 300422 , ETS 300445 , CE , FCC
    Features
    Handheld transmitter designed for use with Sennheiser XSW 1 and XSW 2 wireless systems
    Equipped with Sennheiser’s revered e825 dynamic microphone capsule
    Automatic frequency management in a stable UHF band
    Built to withstand even the most demanding performance environments
    Reliable signal transmission with intuitive operability
    Perfect for bands, theatres, conferences, lectures and more
    Warm and natural vocal reproduction with outstanding clarity
    Handy mute switch allows you to silence signal transmission with ease
    Linear frequency response from 100Hz up to 2.5kHz with a soft presence boost around 5kHz
    Excellent speech intelligibility with the ability to cut through the mix on your PA system

    More info
  • Microphone KAM Dual Wireless
    The KAM KWM11 is a dual channel, VHF wireless microphone system with a half-width 1U receiver and 2 handheld transmitter mics. This is a great affordable package for those looking to either set up a venue, or just to take to gigs and practice sessions.
    This excellent value dual VHF radio is a great sounding robust microphone system. Ideal for Schools, PA, Aerobics, Churchs etc.
    * Power LED
    * Receiver signal staus LED
    * 2 x Balanced XLR individual outputs Combined unbalanced 1/4” jack output
    * Individual channel A & B level controls
    * Range 50m
    * THD 0.5%
    * Mic power on/off switch
    * Mic mute/on switch
    * Mic signal status LED
    * Mic battery status LED
    * Frequency Response 40Hz – 15kHz
    * S/N Ratio >90dB
    * 50kHz bandwidth

    More info
  • Microphone KAM KWM6 Wireless
    Kam KWM wireless mic kits are ideal for the stage bound vocal performer who needs freedom to roam with a quality of sound you’ll find hard to beat for the price.

    The KWM6 system also offers simple setup and operation, making setup a breeze. All KAM wireless mic systems run on Channel 70 and are therefore not affected by the 2012 Digital Switchover.

    Features:
    Dual antenna with A-B switching
    Power LED
    Receiver signal staus LED
    Balanced XLR audio output
    Unbalanced 1/4 inch jack audio output
    Output level control
    Range: up to 50m
    Mic power on/off switch
    Mic mute/on switch
    Mic signal status LED
    Mic battery status LED
    Frequency response: 40Hz – 15kHz
    S/N ratio: >90dB
    THD: 0.05
    50kHz bandwidth
    RF frequency: 175.0

    More info
  • Mixer Citronic 8:4 4 Channel
    The Citronic 14 input, 4 channel professional DJ mixer is best suited for mobile use and installations. Every channel has 3 band EQ with individual volume control that can be set to either side of the cue mix fader or crossfader. Featuring a USB IN/OUT for playback or recording, and there are 3 x microphone inputs, great for karaoke and DJ set-ups.

    Specifications:

    3.5mm input option for patching in an MP3 player
    Internal digital delay or FX loop for vocal mics
    Individual gain controls on each music channel

    Equaliser:

    Bass: -30 +10dB @ 100Hz
    Midrange: -30 +10dB @ 800Hz
    Treble: -30 +10dB @ 9kHz

    Signal to noise ratio:

    Line: >87dB
    Mic: 68dB
    Phono: 73dB

    2x phono, 6x line, 2x USB IN/OUT, 1x 3.5mm jack and 3x microphone inputs
    3-band EQ on all stereo channels
    DJ mic + 2 vocal mic inputs for karaoke
    Hi/Lo EQ for each mic channel
    45mm rail glide replaceable crossfader with defeat and assign channels
    Remote fader starts on stereo channels
    12Vdc BNC output for console light
    Power supply: 115/230Vac, 50/60Hz (IEC)
    Headphone output: 112mV @ 32 Ohms
    Console light power: 12Vdc 5W max (BNC)
    Dimensions: 483 x 175 x 110mm (4U)
    Weight: 4.06kg

    MORE INFORMATION

    More info
  • Mixer Citronic 2 channel 2U
    A straightforward traditional two-channel mixer with a solid build quality and an uncluttered layout. It has high quality faders, sturdy rotaries and includes a dedicated microphone input with two-band EQ and level control. The monitor section features a rotary control to switch between channels 1 and 2 allowing the user to have a mix of both channels at the same time through the headphones.
    2 channel, 5 input mixer (2 phono, 2 line, 1 mic)
    Individual gain controls
    2 band music EQ with up to 35dB cut per channel
    Dedicated mic channel with 2 band EQ
    Headphone cue mix
    3-bar LED monitor
    Easy glide replaceable crossfader
    Weight: 2.8kg
    Dimensions (WxHxD): 228x87x265mm (6U)

    More info
  • Mixer Citronic CM6
    Compact format live mixing console with mic/line inputs (jack/XLR) and a stereo line channel which can be fed from an internal USB/SD audio player. Mic/line channels have individual inserts and all channels have 3-band EQ, Aux and Effect controls. Phantom power of +48V is switchable to the XLR inputs for condenser microphones. Applications range from sub-mixing to main live PA console.

    Power supply 12Vac 1000mA (included)
    Phantom power Switchable +48V (XLR inputs)
    Frequency response: Inputs 20Hz – 20kHz
    Stereo input 6.3mm jack/RCA (-8 to +15dB / +13 to +60 parallel)
    SNR: Mic inputs 120dB E.I.N.
    SNR: Line inputs 95dB E.I.N.
    SNR: Stereo input 96dB E.I.N. (or 104dB E.I.N. in parallel)
    EQ: High 10kHz, ±15dB
    EQ: Mid 700Hz, ±15dB
    EQ: Low 50Hz, ±15dB
    Outputs: Main (L+R)6.3mm jack (+28dBu balanced / +22dBu unbalanced)
    Aux send, Effects send, Tape out unbalanced 6.3mm jack (+22dBu)
    Phones output +15dBu stereo 6.3mm jack

    More info
  • Mixer Citronic CSL 8
    Compact mixing consoles with balanced mic/line inputs and 2 stereo inputs, each with 3-band EQ and aux send. A 16 program DSP section with tap tempo can provide vocal effects and a 7-band graphic EQ facilitates global tone control.
    24-bit 16 program DSP effects
    3-band EQ per channel
    7-band global graphic EQ
    Internal power supply
    Balanced main outputs
    . Designed primarily for venues and stage applications, these models offer a compact and comprehensive solution for mobile PA, bars and special events.
    230Vac, 50Hz (IEC)
    Power Consumption Max. 25W
    Fuse T1AL
    Input Level +24dBu
    Output Level : Line +26dBu
    Frequency Response 20Hz-30kHz (0.5dB)
    CMRR >74dB (mic 1kHz)
    THD +N <0.01% (channel to main out) Crosstalk >85dB (fader mute), >82dB (channel)
    Noise Rms : 22Hz-22kHz -122dBu (EIN), -82dBu (mix)
    EQ: High 12kHz ±15dB shelving
    EQ: Mid 2.5kHz ±15dB band pass
    EQ: Low 80Hz ±15dB shelving
    Input Impedance : Mic (Balanced) 2k Ohms
    Input Impedance : Line (Balanced) 10k Ohms
    Sensitivity : Mic -60 to +14dBu
    Sensitivity : Line -40 to +14dBu
    2-Track 2 x RCA in & out (-2dBu)
    Effects 16 program DSP (24-bit sigma-delta, 40KHz)
    Output Impedance <75 Ohms Headphone Output 6.3mm jack, 30-600 Ohms

    More info
  • Mixer Citronic Pro 2
    The PRO-2 MKII is a straightforward traditional 2-channel mixer with a solid build quality and an uncluttered layout. It has high quality faders, sturdy rotaries and includes a dedicated microphone input with 2-band EQ and level control. The monitor section features a rotary control to switch between channels 1 and 2 allowing the user to have a mix of both channels at the same time through the headphones.
    EQ Range 2-band music EQ with up to 35dB cut per channel
    Inputs 5 x inputs: 2 x phono, 2 x line, 1 x mic
    Outputs headphone output
    Dedicated mic channel with 2-band EQ
    Headphone cue mix
    3-bar LED monitor
    Easy glide replaceable crossfader
    Individual gain controls

    More info
  • Speakers Brooke 10″ 250 watt
    The 10″ INH-10 Install ‘N’ Hire plywood speaker is flexible enough to be flown, stand, floor or monitored and still meet and exceed the needs for both professional Fixed Installations and Audio Equipment Hire.

    No matter how well speakers are made, they must deliver superb sound. These INH speakers are made from high quality plywood, rather than cheaper chipboard or MDF. Each driver is optimised for the best possible sound and efficiency then crossovers and cabinet volumes are fine-tuned to give breathtaking performance.

    Impedance: 8Ω
    Power: 250w RMS
    Frequency: 65Hz – 20KHz
    Sensitivity: 95dB SPL @ 1m: 120dB
    Driver(s): 10″ Bass, 1″ Tweeter
    Inputs: 2 x Neutrik Speakon®
    Enclosure: Black 18mm Ply

    More info
  • Speakers Electrovoice ELX 15″ Full Range
    More power, fuller sound for larger rooms.
    Full range speaker system package including 2 x bass and two tops. Q66 or Q99 amplifier will give that punch to any event. DJ, Disco or Band.

    • EVS-15K woofer
    • 1.5-inch DH-1K titanium HF compression driver
    • 50 Hz – 20 kHz frequency range
    • 90° x 50° coverage-pattern waveguide
    • 60° Monitor Angle
    • 134 dB max SPL
    • Power handling: 400 W continuous, 1600 W peak
    • Braced 15mm plywood enclosure
    • Pole mount or stack with Live X Subwoofers
    • Black textured finish
    • Electro Voice has designed this ZLX-15P active speaker with a clear vision in mind. It had to be lightweight, it had to deliver a lot of power for use on stage, and it had to have better sound quality than the majority of other speakers in its class. They have succeeded in their quest, and the result is this ZLX-15P, equipped with a 15-inch woofer that, together with the 1.5-inch compression driver, is driven by a 1,000W digital amplifier. The built-in signal processor can be controlled with a single press of a button and makes it possible for you to fine tune your speaker in an organised fashion.

    More info
  • Speakers Electrovoice ELX 118 Bass 400 watt.
    Full range speaker system package including 2 x bass and two tops. Q66 or Q99 amplifier will give that punch to any event. DJ, Disco or Band.
    Get full-bodied bass with this subwoofer from Electro-Voice. Join it with the ELX112 and ELX115 for a roaring sound that’ll blow the audience away. 
    Supplemental bass for ELX112 or ELX115
    EVS-18K woofer for extended LF.
    35 Hz – 200 Hz frequency range
    134 dB max SPL
    Power handling: 400 W continuous, 1600 W peak
    Braced 15mm plywood enclosure
    Stack or pole-mount full-range boxes
    Black textured finish
    The Electro Voice ELX 118 is a passive 18-inch subwoofer from the Live-X series. This series was designed for live use and is therefore solidly built. The cabinet is made of 15mm-thick wood and the woofer is protected by a steel grille. Not only is this subwoofer lightweight, but it’s also easy to lift, thanks to the metal handles. The Live-X series is a musical line, equipped with quality parts and a reasonable price tag. This makes it attainable for all different types of musicians, sound technicians and theatres. This series sounds like a real Electro Voice: tight, clear, neutral and dynamic.

    More info
  • Speakers EV Eliminator Bass 400 watt
    18-inch sub with 400 watts continuous, 1,600 watts peak power handling. Built-in passive crossover and unique acoustical design allows parallel operation with Eliminator i or Eliminator i Double on a single amplifier channel. Tour-proven cast-frame DL18MT woofer delivers solid bass and reliable performance. Strong, light RoadWood enclosure is covered in industrial-grade black carpet that resists damage from transportation. Comes with corner protectors, EV’s comfort-lift handles, metal stand mount and 18-inch steel pole to elevate satellite speaker.
    Features
    18″ high-output sub complements the Eliminator i stage system
    18″ steel pole included
    Cast-frame DL18MT woofer delivers solid bass and reliable performance
    ¼” phone input and output connections
    Built-in passive crossover
    Strong, light RoadWood enclosure is covered in industrial-grade carpet
    Corner protectors, comfort-lift handles and metal stand mount

    More info
  • Speakers EV Force Full Range 15″Electrovoice
    EV Force ie Full Range Speakers 350 watt
    Spec:
    Frequency Response (-3dB): 60 – 20000 Hz
    Frequency Response (-10dB): 40 – 20000 Hz
    Sensitivity: 1W/1m 100 dB
    Max. SPL / 1m (calc); full space: 130 dB
    Horizontal coverage (nominal -6dB): 80 degrees
    Verticle Coverage (nominal -6dB): 55 degrees
    System Power Handling (continuous/program/peak): 250/500/1000 Watts
    Nominal Impedance (Passive): 8 Ohms
    Input Connections: Parallel Neutrik NL4
    Chassis Size: 15 inches
    Internal Crossover: Yes
    Speaker Type: Fullrange, Mid-High, Two-Way
    Weight Net: 53.13 lbs (24.1 kg)
    Dimensions (HxWxD): 25.51″ x 18.31″ x 15.2″, (648 x 465 x 386 mm)
    ELX115P
    15″ Powered Loudspeaker
    ELX115 performance with self-amplification
    44 Hz – 20 kHz frequency range
    Lightweight, cool-running 1000 W Class D amp
    Biamped with 24 dB/octave crossover
    Transducer protection
    Bypassable high-pass for external subwoofer
    XLR, TRS, and RCA input connections
    Versatile gain, mixing, and processing controls
    Pre- or post-mix parallel outputs

    EV Force ie

    More info
  • Active Speakers Warrior PSR 8″ 150 watt
    High Impact Moulded Polypropylene Enclosure 1.5″ Voice Coil, 1 inch Exit Aluminium Compression Driver 5 Integral Suspension Points Complete Mounting Solutions Smooth Response With High Power Handling Capacity.

    • Output power: 150W RMS
    • Maximum calculated SPL: 117dB
    • Efficiency (1watt/1metre): 94dB
    • Frequency range (-10dB): 60Hz – 20kHz
    • Frequency range (-3dB): 70Hz – 20kHz
    • Crossover frequency: 3.5kHz
    • Horizontal coverage: 90 degrees
    • Vertical coverage: 60 degrees
    • Low frequency transducer: 8″/203mm
    • High frequency transducer: 1.5″/34mm
    • Connections: Jack and XLR
    • Pole mountable
    • Multiple 10mm rigging points
    • Other features:
      Independent level control for line & microphone inputs
      Master level control
      High impact polypropylene enclosure

    4 x Passive PSR 8″ Speakers also available, please ask for details.

    More info
  • Speakers Warrior PSR 10″ Active 250 watt
    Output power: 350W RMS Maximum calculated SPL: 122dB Efficency (1watt/1metre): 94dB Frequency range (-10dB): 65Hz – 20kHz Frequency range (-3dB): 75Hz – 18kHz Crossover frequency: 1.8kHz Horizontal coverage: 80 degrees Vertical coverage: 60 degrees Low frequency transducer: 10″/254mm High frequency transducer: 1.4″/34mm Input connections: 2 x jack and 1 x XLR Output connections: 1 x XLR Pole mountable Multiple 10mm rigging points .

    • Max. system power: 700W
    • Amplifier output power: 350W RMS
    • Maximum calculated SPL: 123dB
    • Frequency range (-10dB): 60Hz – 19kHz
    • Frequency range (-3dB): 70Hz – 19kHz
    • Crossover frequency: 2.5kHz
    • Horizontal coverage: 80 degrees
    • Vertical coverage: 60 degrees
    • Low frequency transducer: 10″/254mm
    • High frequency transducer: 1″/25mm
    • Input conections: 2 x XLR
    • Output connections: 1 x XLR
    • Pole mountable
    • Multiple 8mm rigging points
    • Other features:
      Independent level control for line & microphone inputs
      Master level control for EQ
      High impact polypropylene enclosure
    More info
  • Speakers Warrior PSR 12″ Active 300 watt
    The PSR series offers superior sound and has features that until now have only been found on more expensive equipment. Safe and easy installation is possible by multiple rigging points and functional casing design gives true multifunction capability without compromise. The PSR Range feature VariFlare; rotatable top end horn flare. This feature allows an installer to tailor the HF dispersion to the application making the PSR range ideal as a foldback monitor or horizontal installation cabinet.

    • Max. system power: 900W
    • Amplifier output power: 450W RMS
    • Maximum calculated SPL: 125dB
    • Frequency range (-10dB): 56Hz – 19kHz
    • Frequency range (-3dB): 65Hz – 19kHz
    • Crossover frequency: 2.2kHz
    • Horizontal coverage: 80 degrees
    • Vertical coverage: 60 degrees
    • Low frequency transducer: 12″/300mm
    • High frequency transducer: 1″/25mm
    • Input conections: 2 x XLR
    • Output connections: 1 x XLR
    • Pole mountable
    • Multiple 8mm rigging points
    • Other features:
      Independent level control for line & microphone inputs
      Master level control for EQ
      High impact polypropylene enclosure
    More info
  • Speakers Warrior PSR 15″ 350 watt
    The PSR series offers superior sound and has features that until now have only been found on more expensive equipment. Safe and easy installation is possible by multiple rigging points and functional casing design gives true multifunction capability without compromise. The PSR Range feature VariFlare; a rotatable horn flare. This feature allows an installer to tailor the HF dispersion to the application making the PSR range ideal as a foldback monitor or horizontal installation cabinet. Built to last, the W-Audio passive electronics contain custom filter circuitry designed to optimize the cabinet’s sonic performance and help protect the driver components.
    High Impact Molded Polypropylene Enclosure

    ï 1.75′ Voice Coil, 1′ Exit Titanium Compression Driver

    ï 5 Integral Suspension Points

    ï Complete Mounting Solutions

    ï Smooth Response With High Power Handling Capacity (Continuous Program/ RMS), 1400W/350W

    ï 80 x 60 Coverage Pattern

    Technical Specifications
    Freq. Range (-10dB): 40Hz~20kHzFreq. Response (-3dB):
    45Hz~18kHz
    Rec.Hipass Frequency: 25Hz
    Axial Sensitivity: 98dB(1W/1m)
    Max Calculated SPL: 129.5dB
    Rated System Power: 350W Continuous 1400W Peak
    LF Transducer: 15L350-81
    HF Transducer: 25H44-81
    Crossover Frequency: 1.7kHz
    Nominal Impedance: 8 Ohms
    Connector: 2 x NL4 Speakon
    Dim (HxWxD): 740mm x 475mm x 400mm
    Net Weight: 25Kg

    More info



Back to top